Nouvelle techno immersionRC

Tout pour le vol en immersion : caméra, lunettes, écran, émetteurs et récepteurs vidéo
Avatar de l’utilisateur
Vinzzhh
Quad de bronze
Messages : 4120
Inscription : lun. 28 déc. 2015 15:27
Contact :

Nouvelle techno immersionRC

Message par Vinzzhh »

Communication de l'organisation du FPV Air Show :
https://www.facebook.com/fpvairshow/pos ... 5452353002

Ça sent la présentation d'une nouvelle techno FPV.


"We know that many of you have been asking questions about the vTx that we will use at the event. We can finally give some answers.
So we are going to try something new at this event. Something that is a potential game-changer for FPV race events.
We will be loaning transmitters for the duration of the 3 day event. The are not like anything ImmersionRC has built before, weighing just 7g with the coax and SMA cable, and less than half the size of the current generation of transmitters.

We realize that these will not be 'plug and play' with any quad at the event, but we believe the benefits will be worth the extra installation 'pain'.
To make installation simple, we have built adapters for our 'old' molex-SL connectors, and will be bringing cables with bare ends for soldered installation also. For the Vortex, we are supplying cables which plug directly into the 5-pin Video Tx connector on the Vortex PDB.

The transmitter may be powered from 4s pack directly, and will provide up to an amp of power at 5V, similar to our current transmitter technology.

For installation, we will have 20 soldering stations available, along with a couple of technicians to help.

The Tx, once installed, remains in your quad until the end of the event, no need to remove it between races.

More information will be distributed at the event. Looking forward to seeing all 200 of you, ready for some awesome racing!"

Avatar de l’utilisateur
sky022
Helice d'or
Messages : 2274
Inscription : lun. 15 févr. 2016 14:38
Localisation : Trémuson (22)
Contact :

Re: Nouvel techno immersionRC

Message par sky022 »

Ils disent pas si c'est du numérique ou analogique ; en tous cas c'est intéressant, ils ont enfin miniaturisé leurs émetteurs :)
Cool de voir que ça bouge de ce côté là
SAM 220x - F40 Pro (2306) 2600kv - Betaflight F3 - RCX "Super RacerBee" 30A D600
RaceDayQuads "RDQ182" - BotherHobby Returner "ZMX" v3 2206 2600kv - Racerstars V2 30A, KK5x4x3
C210 (QAV210) - FVT LittleBee 30A - RS2205 2300kv - SPRF3 - DALprop V2 5045BN - HS1177
MINIMALIST 128 mini 3" - RS MS15A - Emax RS1306 4000kv - Graphene 3S 500mAh 65C

Avatar de l’utilisateur
Beach
Quad d'argent
Messages : 5286
Inscription : lun. 3 août 2015 03:44
Localisation : LA BOUEXIERE
Contact :

Re: Nouvel techno immersionRC

Message par Beach »

Enfin immersion fait plus petit niveau vtx... il était temps

Envoyé de mon GT-I9100P en utilisant Tapatalk
Zigogne RS200: Betaflight FC, RAcerstar 30AV2, F40Pro 2306 2400kv
QAVX: Betaflight FC, Hobbywing 30A, Brother hobby 2206 R4 2300kv
QAV210: FC F3, Littlebee spring 30A, Brother hobby 2206 R3 2600kv
RUB130: Piko BLX, racerstar 12A, Emax 1306 4000kv (3s)
QAVR6": FC F3, Esc littlebee 30A, F60 2207 2000kv

Fatshark Domintor SE
Taranis X9D+

I believe I can Crash !

Avatar de l’utilisateur
Vinzzhh
Quad de bronze
Messages : 4120
Inscription : lun. 28 déc. 2015 15:27
Contact :

Re: Nouvel techno immersionRC

Message par Vinzzhh »

Ils parlent quand même de "game changer" donc ça doit aller au delà de la miniaturisation, quand bien même c'est déjà une bonne nouvelle en soi.

Avatar de l’utilisateur
Beach
Quad d'argent
Messages : 5286
Inscription : lun. 3 août 2015 03:44
Localisation : LA BOUEXIERE
Contact :

Re: Nouvel techno immersionRC

Message par Beach »

C est cool en tout cas... pas besoin d enlever le transmetteur entre les courses. Ils doivent avoir une manip (une clef) pour activer le tx meme sous tension.

Tu penses qu'ils préparent une annonce surprise de numérique ? Ca serai malin de le faire comme ça mais risqué sur ce type d event important

Envoyé de mon GT-I9100P en utilisant Tapatalk
Zigogne RS200: Betaflight FC, RAcerstar 30AV2, F40Pro 2306 2400kv
QAVX: Betaflight FC, Hobbywing 30A, Brother hobby 2206 R4 2300kv
QAV210: FC F3, Littlebee spring 30A, Brother hobby 2206 R3 2600kv
RUB130: Piko BLX, racerstar 12A, Emax 1306 4000kv (3s)
QAVR6": FC F3, Esc littlebee 30A, F60 2207 2000kv

Fatshark Domintor SE
Taranis X9D+

I believe I can Crash !

Avatar de l’utilisateur
Vinzzhh
Quad de bronze
Messages : 4120
Inscription : lun. 28 déc. 2015 15:27
Contact :

Re: Nouvel techno immersionRC

Message par Vinzzhh »

Ils vont voler à 10 en tout cas.
Ca doit aller au delà des duo immersionrc 25mw alternés RHCP/LHCP.

Avatar de l’utilisateur
Beach
Quad d'argent
Messages : 5286
Inscription : lun. 3 août 2015 03:44
Localisation : LA BOUEXIERE
Contact :

Re: Nouvel techno immersionRC

Message par Beach »

Oui obligatoirement ! Hummm ca sent bon tout ça ! En meme temps il l'avait plus ou moins teaser déjà dans l interview !

Envoyé de mon GT-I9100P en utilisant Tapatalk
Zigogne RS200: Betaflight FC, RAcerstar 30AV2, F40Pro 2306 2400kv
QAVX: Betaflight FC, Hobbywing 30A, Brother hobby 2206 R4 2300kv
QAV210: FC F3, Littlebee spring 30A, Brother hobby 2206 R3 2600kv
RUB130: Piko BLX, racerstar 12A, Emax 1306 4000kv (3s)
QAVR6": FC F3, Esc littlebee 30A, F60 2207 2000kv

Fatshark Domintor SE
Taranis X9D+

I believe I can Crash !

Avatar de l’utilisateur
sky022
Helice d'or
Messages : 2274
Inscription : lun. 15 févr. 2016 14:38
Localisation : Trémuson (22)
Contact :

Re: Nouvel techno immersionRC

Message par sky022 »

Vivement les courses à la NASCAR avec 50 quads en même temps :gaga:
SAM 220x - F40 Pro (2306) 2600kv - Betaflight F3 - RCX "Super RacerBee" 30A D600
RaceDayQuads "RDQ182" - BotherHobby Returner "ZMX" v3 2206 2600kv - Racerstars V2 30A, KK5x4x3
C210 (QAV210) - FVT LittleBee 30A - RS2205 2300kv - SPRF3 - DALprop V2 5045BN - HS1177
MINIMALIST 128 mini 3" - RS MS15A - Emax RS1306 4000kv - Graphene 3S 500mAh 65C

Avatar de l’utilisateur
Vinzzhh
Quad de bronze
Messages : 4120
Inscription : lun. 28 déc. 2015 15:27
Contact :

Re: Nouvel techno immersionRC

Message par Vinzzhh »

sky022 a écrit :Vivement les courses à la NASCAR avec 50 quads en même temps :gaga:
40 quads au tapis dès le décollage.
Ça fera une course a 10 :D

Avatar de l’utilisateur
Beach
Quad d'argent
Messages : 5286
Inscription : lun. 3 août 2015 03:44
Localisation : LA BOUEXIERE
Contact :

Re: Nouvel techno immersionRC

Message par Beach »

Vinzzhh a écrit :
sky022 a écrit :Vivement les courses à la NASCAR avec 50 quads en même temps :gaga:
40 quads au tapis dès le décollage.
Ça fera une course a 10 :D
Mdr
Zigogne RS200: Betaflight FC, RAcerstar 30AV2, F40Pro 2306 2400kv
QAVX: Betaflight FC, Hobbywing 30A, Brother hobby 2206 R4 2300kv
QAV210: FC F3, Littlebee spring 30A, Brother hobby 2206 R3 2600kv
RUB130: Piko BLX, racerstar 12A, Emax 1306 4000kv (3s)
QAVR6": FC F3, Esc littlebee 30A, F60 2207 2000kv

Fatshark Domintor SE
Taranis X9D+

I believe I can Crash !

Répondre

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 1 invité