Page 1 sur 3

Nouvelle techno immersionRC

Publié : jeu. 12 mai 2016 10:45
par Vinzzhh
Communication de l'organisation du FPV Air Show :
https://www.facebook.com/fpvairshow/pos ... 5452353002

Ça sent la présentation d'une nouvelle techno FPV.


"We know that many of you have been asking questions about the vTx that we will use at the event. We can finally give some answers.
So we are going to try something new at this event. Something that is a potential game-changer for FPV race events.
We will be loaning transmitters for the duration of the 3 day event. The are not like anything ImmersionRC has built before, weighing just 7g with the coax and SMA cable, and less than half the size of the current generation of transmitters.

We realize that these will not be 'plug and play' with any quad at the event, but we believe the benefits will be worth the extra installation 'pain'.
To make installation simple, we have built adapters for our 'old' molex-SL connectors, and will be bringing cables with bare ends for soldered installation also. For the Vortex, we are supplying cables which plug directly into the 5-pin Video Tx connector on the Vortex PDB.

The transmitter may be powered from 4s pack directly, and will provide up to an amp of power at 5V, similar to our current transmitter technology.

For installation, we will have 20 soldering stations available, along with a couple of technicians to help.

The Tx, once installed, remains in your quad until the end of the event, no need to remove it between races.

More information will be distributed at the event. Looking forward to seeing all 200 of you, ready for some awesome racing!"

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 10:56
par sky022
Ils disent pas si c'est du numérique ou analogique ; en tous cas c'est intéressant, ils ont enfin miniaturisé leurs émetteurs :)
Cool de voir que ça bouge de ce côté là

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 10:56
par Beach
Enfin immersion fait plus petit niveau vtx... il était temps

Envoyé de mon GT-I9100P en utilisant Tapatalk

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 11:15
par Vinzzhh
Ils parlent quand même de "game changer" donc ça doit aller au delà de la miniaturisation, quand bien même c'est déjà une bonne nouvelle en soi.

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 11:44
par Beach
C est cool en tout cas... pas besoin d enlever le transmetteur entre les courses. Ils doivent avoir une manip (une clef) pour activer le tx meme sous tension.

Tu penses qu'ils préparent une annonce surprise de numérique ? Ca serai malin de le faire comme ça mais risqué sur ce type d event important

Envoyé de mon GT-I9100P en utilisant Tapatalk

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 12:09
par Vinzzhh
Ils vont voler à 10 en tout cas.
Ca doit aller au delà des duo immersionrc 25mw alternés RHCP/LHCP.

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 12:15
par Beach
Oui obligatoirement ! Hummm ca sent bon tout ça ! En meme temps il l'avait plus ou moins teaser déjà dans l interview !

Envoyé de mon GT-I9100P en utilisant Tapatalk

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 13:28
par sky022
Vivement les courses à la NASCAR avec 50 quads en même temps :gaga:

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 13:38
par Vinzzhh
sky022 a écrit :Vivement les courses à la NASCAR avec 50 quads en même temps :gaga:
40 quads au tapis dès le décollage.
Ça fera une course a 10 :D

Re: Nouvel techno immersionRC

Publié : jeu. 12 mai 2016 13:41
par Beach
Vinzzhh a écrit :
sky022 a écrit :Vivement les courses à la NASCAR avec 50 quads en même temps :gaga:
40 quads au tapis dès le décollage.
Ça fera une course a 10 :D
Mdr